The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
Rated Current(220V input):133A
Rated Current(110V input):100A
Rated Power(220V input):1600W
Rated Power(110V input):1200W
Ripple & Noise: less than 1%
Voltage Regulation: less than 2%
Source Regulation: less than 1%
Load Regulation: less than 1%
Setup, Rise Time: less than 2S
Power off Protection Trip Time:more than 9mS
Interface Type:5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Noise Level: less than 43DB
Voltage Range:100-240V AC
Starting Voltage:95-105V AC
Power Factor: more than 0.95 (full load)
Leakage Current: less than 1.5mA (220V 50Hz)
Low-voltage Input:80-89V AC
Output Short Circuit:Yes
Output Overcurrent:134-185A max.
Operating Temperature:-20 Celsius – 50 Celsius
Operating Humidity:20% – 90% relative humidity (non-condensing)